Options   Quantity:       1 2 3 4 5 6 7 8 9 10 Price: $999.99 (€ 649.99) In stock  Add to cart

Details

10600 - HPI 1/5 Baja 5B Buggy RTR.

This is the 1/5 scale, gasoline powered, radio controlled, HPI Baja 5B Ready to Run Off-Road Buggy.

**Additional Technical Info Will Be Added When It Becomes Available.**

FEATURES:
Chassis: Narrow channel monologue design 0.16" (4mm) thick, purple in color constructed of aircraft grade 6061 T6 aluminum
Drive: Rear wheel gear drive
Engine: 1.40 cu in (23cc) gasoline with pull starter, dual element foam air filter, primer choke and kill switch
Exhaust: Routed to rear of vehicle with pipe
Fuel Tank:
Radio: TF-10 FM receiver has adjustable failsafe, 6V 2000mAh rechargeable receiver pack, AC charger
water resistant housing on chassis with external charging jack and rubber cap for easy crystal changes
Servos: Water resistant with high torque 25kg-cm steering servo
Clutch: Automatic centrifugal type
Transmission:
Ball Bearings: Full set included
Shocks: Four Hyper Adjust Piston aluminum shocks with 5 externally adjustable dampening settings and dual rate springs for progressive dampening action on all surfaces
Main Gear: tooth
Gearbox: Front and rear sealed
Differentials: Viscous Torque Control can be tuned using different weight diff oils, hardened metal planetary gears
Brakes: Ventilated dual disc
Tires: HPI Dirt Buster with different tread pattern for front and rear
Wheels: Nylon 3-piece bead lock, bead is bolted to wheel to hold tire securely in place-no need for tire glue
Body: Pre-painted buggy type with rear wing
Roll Cage: Baja style high impact nylon protects engine and body from crash damage
Bumpers:
Suspension: Fully adjustable, long travel double wishbone
Caster: Adjustable, with shim 22 / 25.5* stock / 29 degrees
caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Steering:
Servo Saver:

INCLUDES:

REQUIRES:
Unleaded gasoline and 2-cycle oil
Misc. Items: Building and track equipment

SPECS:
Vehicle:
Length: 32.2" (817mm)
Front Width: 18.1" (460mm)
Rear Width: 18.9" (480mm)
Height: 10" (255mm) with 1G, 11" (280mm) with 0G
Ride Height: 3" (76mm)
Suspension Travel: Front 3.7" (95mm), Rear 3.9" (100mm)
Weight: 21.3 lbs (9.6kg)(approx.)
Wheelbase: 22.4" (570mm) wheels on-center front-to-rear
Tread- Front- Rear- wheels on-center side-to-side
Gear Ratio: 8.382:1
Tires- Front: " x . " ( x mm)
Rear: " x . " ( x mm)
Body:
Length: - / " ( mm)
Width: - / " ( mm) at rear wheels (widest point)
- / " ( mm) behind from wheels (thinnest point)
Height: - / " ( mm)

COMMENTS:
For Replacement Ball Bearings use:
Body pictured on the box is painted orange and yellow.