Options   Quantity:       1 2 3 4 5 6 7 8 9 10 Price: $338.95 (€ 220.32) ON BACK ORDER  Add to cart

Details

2033-Associated Nitro TC3 Factory Team Kit.

This is the radio controlled, nitro powered, four wheel drive Team Associated Nitro TC3 Factory Team kit.
This kit is a full race version loaded with over $200 worth of pro-level Factory Team upgrades and options.

FEATURES:
Chassis:
0.10" (2.6mm) thick anodized aluminum.
Drive: Four wheel floating aluminum shaft drive.
Fuel Tank: With tank insert to make IFMAR capacity legal.
Clutch: Two-shoe.
Transmission: Two speed "Sure Shift" with a low 6.43:1 first gear for more low-end punch out of corners, and a higher 4.44:1 second gear for high top speeds.
Bearings: Full set, 20 total.
Shocks: Four coil-over oil-filled aluminum bodied VCS macro.
Spur Gears: 48 tooth and 54 tooth.
Suspension: Pivot ball type with redesigned rear hub carrier rear suspension now accepts blade style anti-roll bar as used on the front suspension, wire type roll bar also included.
Brakes: NASCAR material pre-bonded pads.
Receiver Compartment: Enclosed.
Muffler: Dual chambered tuned pipe.
Bumper: Rubber mounted front floating foam with extra wide Kydex base.
Steering: Newly designed steering rack featuring nearly perfect.
Ackerman, (Ackerman describes the effect of the inside front wheel turning tighter than the outside front wheel).
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis.
Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when when viewed from front or behind vehicle.
Turnbuckles: Blue titanium.

INCLUDES:
Nitro TC3 Factory Team chassis, four shocks, fuel tank, tuned pipe,linkages for both slide valve and rotary carbs, instruction manual.
Factory Team front one-way, air filter oil, wrenches, camber/toe-in gauge, track width/ride height tool.

REQUIRES:
Radio: 2-channel with two standard size servos.
Receiver Battery: 4 cell, 4.8V.
Radio Batteries: 8 AA size.
Engine: .12 or .15 rear or side exhaust non pull-start engine with rotary or slide valve carburetor, short or SG type crankshaft.
Starter: Starter box or electric hand-held starter with donut.
Fuel: Car fuel with 10-20% nitro and at least 16% lubricant content.
Tires and Wheels: Touring car type 12mm hex size.
Body: Touring car style, 200mm wide.
Misc Items: Fuel bottle, glow starter.

SPECS:
Length: 15" (381mm).
Wheelbase: 10.25" (260mm) (wheels on-center front-to-rear).
Ground Clearance: 1.37" (35mm).

COMMENTS:
For replacement bearings use:
..........................Qty Size Location
[ DTXC1413 ] - 4 3/16" x 5/16" outdrives.
[ DTXC1437 ] - 4 3/8" x 5/8" outdrives.
[ DTXC1423 ] - 1 3/16" x 3/8" front input shaft.
[ DTXC1425 ] - 8 3/16" x 3/8" fr & r hub carriers.
[ DTXC1535 ] - 1 5mm x 10mm clutch.
[ 4320 ] -1 5mm x 9mm x 3mm clutch (flanged).