Options   Quantity:       1 2 3 4 5 6 7 8 9 10 Price: $348.95 (€ 226.82) In stock  Add to cart

Details

30103 Associated Factory Team TC5 Kit

This is the 1/10 scale electric powered, radio controlled,
Associated TC5 Factory Team On-Road Touring Car Kit.

FEATURES:
Chassis: Double deck 1/8" (2.5mm) thick woven carbon fiber with blue aluminum bulkheads for very rigid chassis assembly allowing easy tweaks for high grip carpet racing or low traction parking lot racing and all conditions in between
Drive: Four wheel dual belt with adjustable diff heights and belt tension
Motor Mount: Machined blue aluminum with integrated heat sink
Ball Bearings: Full set of 20
Shocks: Four VCS2 oil-filled with coil-over springs, silicone shock bladders and hard anodized threaded bodies
Shock Towers: 0.12" (3mm) thick woven carbon fiber
Carbon Fiber: Front and rear shock towers battery strap, steering rack, and bellcranks
Camber Link Mounts: Blue anodized aluminum
Top Deck Standoffs: Blue anodized aluminum
Arm Mounts: Blue anodized aluminum
Hex Drive: 12mm, clamping, blue anodizied aluminum
Main Gear: Kimbrough 87 tooth, 48 pitch plastic construction
Gearbox: Closed front and rear
Differentials: Ball differential in the front and rear, composite with blue aluminum outdrive saver rings
Bumpers: Foam front
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Steering: Ball bearing supported, mono-bellcrank with integrated adjustable servo saver
Ackerman: Adjustable, Ackerman describes the effect of the inner front wheel turning faster than the outer front wheel during turns
Sway Bar: Front and rear
Battery Strap: Woven carbon fiber

INCLUDES:
TC5 rolling chassis with oil-filled threaded aluminum shocks, Carbon fiber chassis, shock towers, blue anodized aluminum parts, carbon fiber parts, blue screws, 20 ball bearings, Associated logo decal sheet, 87T 48 pitch Kimbrough spur gear, titanium blue anodized turnbuckles, illustrated manual and complete parts breakdown

REQUIRES:
Radio: 2-channel
Servo: 1-standard size
Motor: 540 size stock or modified
ESC: For the selected motor
Battery: 6 cell side-by-side construction
Tires: Touring car tires
Wheels: Wheels that are the same width as the selected tires
Charger: AC/DC timed or peak for 6-cell battery
Body: 190mm touring car body
Pinion: 48 pitch, number of teeth based on motor selection
Misc. Items: Building and track equipment

SPECS:
VEHICLE
Length: 14.6" (372mm)
Front and Rear Track: 7.5" (190mm) distance between outer edges of tires
Weight: 1.15lb (525g)
Wheelbase: 10.2" (259mm)
Internal Gear Ratio: 2.0

COMMENTS:
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 5x8mm Differential 1 DTXC1523
4 10x15mm Differential 1 DTXC1595
2 4x7mm Servo Saver 1 DTXC1507
2 8x4mm Spur Gear Shaft 1 DTXC1511
4 6x10mm Front Hubs 1 DTXC1561
4 6x10mm Rear Hubs 1 DTXC1561

Woven Carbon Fiber Parts
Lower chassis
Top deck, 2.5mm
2.5mm thick woven carbon fiber spine
3.0mm thick woven carbon fiber shock towers
Carbon Parts
Antenna mount
Front and rear arms
Servo mounts
Steering block and hub carriers
Aluminum Parts-all blue in color
Motor bulkhead
Camber link spacer, camber link (left side)
Camber link spacer, camber link (right side)
Standoffs
Clamping hex drives
Aluminum arm mount (Triangle)
Aluminum arm mount (Circle)
Aluminum arm mount (Square)
Aluminum arm mount (X-2.5)
Wheel nuts