Options   Quantity:       1 2 3 4 5 6 7 8 9 10 Price: $238.95 (€ 155.32) In stock  Add to cart

Details

30111-Associated TC4 Touring Car RTR.

This is the 1/10 scale electric powered, radio controlled, Associated RC10 TC4 on-road ready-to-run Touring Car.
This kit is designed for the advanced touring car racer.

FEATURES:
Chassis:0.098" (2.5mm) thick, redesigned with the batteries moved.
closer to the center line of the car than the TC3 for quicker directional transitions.
Drive: Four wheel shaft drive, blue anodized aluminum driveshaft.
Motor: Team Associated Reedy Radon 17 turn.
Radio: 2 channel AM 27MHz pistol grip Team Associated XP2 made by Airtronics with steering and throttle trim and reverse, steering dual rate, ATV, charge jack and standard size steering servo Ball Bearings: Rubber sealed full bearing set.
Shocks: Factory oil-filled, VCS (Volume Compensating System) Macro composite bodied with preload spacers to adjust ride height.
Gearbox: Closed front & rear.
Differentials: Ball type.
Transmission: Single-speed-speed.
Body: Pre-painted and trimmed with simulated carbon rear wing and hood.
Tires: Rubber treaded with inserts, 2.5" (64mm) outer diameter, 1" (26mm) wide.
Wheels: Eight spoke chrome finish 2" (52mm) diameter, 1" (26mm) wide.
Speed Control: Electronic-LRP Ai Super Reverse Digital, [ LRP8320 ].
Bumper: Front, foam.
Suspension: Adjustable.
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis.
Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle.
Steering: Ackerman type that allows the inside front wheel to turn tighter than the outside front wheel.
Servo Saver: Included, adjustable.

INCLUDES:
One 1/10 scale electric powered 4WD Associated TC4 ready to run Touring Car with 17 turn motor, pre-painted and trimmed body, tires, wheels, 23 tooth pinion gear, 72 tooth spur gear, 2 ch radio with servo, ESC with reverse, street tuner decal sheet and illustrated instruction manual.

REQUIRES:
Radio Batteries: (8) AA size.
Battery: 6 cell w/standard connector (stick or side by side).
Charger: AC/DC timed or peak for 6-cell battery.
Misc. Items: Building and track equipment.

SPECS:
VEHICLE:
Length: 14.7" (373mm).
Width: 7.5" (190mm).
Height: 4.2 (107mm) at rear body mount (highest point).
Weight: 3.03lbs (1375g) with electrics, without body.
Wheelbase: 10.2" (259mm).
Tread: Front and Rear- 6.5" (164mm).
Front and Rear Track: 7.5" (190mm).
Ground Clearance: 0.31" (8mm).
Gear Ratio: 2.50:1.
Tires- Front and Rear: 2.5" (64mm) outer diameter, 1" (26mm) wide.
BODY:
Length: 1.6" (440mm).
Width: 7.5" (190mm).
Height: 4.1" (104mm).

COMMENTS:
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set.
[ 3916 ] - 2 4x8x2mm Diff.
[ DTXC1437 ] - 2 3/8 x 5/8mm Outdrives.
[ DTXC1413 ] - 4 3/16 x 5/16mm Steering (optional).
[ DTXC1423 ] - 2 3/16 x 3/8mm Fr Input Shaft.
[ DTXC1423 ] - 1 3/16 x 3/8mm Input Bearing Housing.
[ DTXC1423 ] - 1 3/16 x 3/8mm Spur Gear.
[ DTXC1423 ] - 4 3/16 x 3/8mm Fr Hubs.
[ DTXC1423 ] - 4 3/16 x 3/8mm Rear Hubs.

It is not possible to request a specific radio channel or body color because they are supplied by the manufacturer at random.